gep productions

 

*  * *  *

BLOODBAR.gif (5078 bytes)

 

TERROR - REX

dino2.jpg (30174 bytes) This LIFE-SIZE T-REX head is an excellent prop for a haunted hayride or theme park attraction. When in the retracted position, the head is high in the air so trees, brush or other types of foliage can hide it. Upon activation, the head comes down out of the foliage rotating back and forth giving the appearance that T-REX is looking for a victim. As the head rotates, T-REX opens and closes its mouth showing off the razor sharp eyeteeth inside. This prop is supplied with a LIFE-SIZE - custom painted - fiberglass head, platform, complete hydraulic system and electronic control with digital audio source that brings this beast to life.

An Audio Sound System IS NOT supplied; however, it can be purchased for an additional cost.

OPTION!

The fiberglass head can be purchased separately for $ 2,995.00

Retail Price:

$ 6,995.00

 

 

GHOUL GRINDER

grinder.jpg (123162 bytes) This prop is not for a person with a weak stomach. It can be used indoors, however, it is best used on hayrides or haunted walks. As the spectators approach, they hear the screams from a person pleading for their life. They see the person ( a quality latex body ) suspended near the opening of the hopper on the GHOUL grinder. The effect is enhanced by the awesome sound of a tree shredder humming and the gears on the front turning continuously. Then the mad operator swings the boom, holding the body, directly over the hopper of the grinder. The operator releases the crank winch handle and the person is slowly lowered into the hopper. When the latex body is completely in the hopper, the operator presses a foot switch that silences the screaming and automatically changes the sound effect to an eerie deep grinding sound. At the same time, two doors on the rear open and release a large amount of small latex body parts into the catch tray at the bottom. Also, a pump starts pumping red food colored water down through the doors. When the viewers have passed, the unit is turned off and the body is cranked to the top again. The body parts fall onto a screen to allow easy return to the upper compartment. The GHOUL GRINDER requires 75-psi air pressure and 115 volts of electric to operate.

This prop comes complete with latex body parts and a Pro Audio System.

 

Retail Price: $ 4,995.00

 

 

DUNGEON OF DOOM

This prop creates the illusion that the person in the dungeon has been hanging around way too long. The person in the dungeon is serving a life sentence and is shackled at the wrists with leather straps and chains that they can pull up and down and make a terrible rattling noise. Since the illusion is that his lower extremities are missing and the body has been there so long that his guts are partially missing, it makes for a great prop in any haunted attraction. The use of flame retardant, plastic rock panels gives the prop an awesome dungeon appearance. The operator wears a stripped prison outfit that fits the part! Our Dungeon of Doom prop also has steel bars in the front to enhance the effect.

This prop comes complete with a 240-watt Audio Centron Sound System, Boss VT1 voice transposer, and clip on microphone. Together, these items allow the operator to create a wide variety of different voice effects.

This prop requires a 115 volt circuit to operate.

 

Retail Price: $ 4,995.00

doom1.jpg (108993 bytes)

doom2.jpg (70273 bytes)

 

 

DEAD TREE

tree4.jpg (95213 bytes) Make that chainsaw effect look real! This tree trunk effect was designed mainly for use on hayrides or haunted walks. In a wooded area, the chainsaw operator can approach the DEAD TREE effect and place the chainsaw, without the chain, into a groove at the base of the tree with the motor running. While revving the motor, the chainsaw can be slid through the groove to simulate cutting the tree. When the chainsaw is almost through the tree, the operator can step on a foot switch that will cause the tree trunk to topple. The tree will produce sawdust chips from the cut area as it is falling. To reset the scene, the operator will press the foot switch again and the tree will return to the upright position.

The DEAD TREE requires 100-psi air pressure and a 115-volt electric circuit to operate.

This effect is also available in a portable, 12-volt DC, model for areas where air and electric are not available. A 12-volt DC car battery and a portable air tank are required for this version. It may be necessary to refill the air tank several times in an evening when the prop is being heavily used.

( Air tank and car battery not included )

 

Retail Price: $ 2,250.00

tree3.jpg (171310 bytes)

 

Shipping charges to be added to all orders

Prices subject to change without notice