 |
AUTOMATIC SCENE CONTROLLERS |
AUTOMAGIC controllers help eliminate the need for manually operated scenes or displays. The state-of-the-art microprocessors used in these controllers are virtually fail-proof. This equals years of reliability and maintenance free operation for the user. The indoor controllers use an infrared light beam trigger. This allows the device to be used in a dark environment and not be visible. When the infrared light beam is broken , the controller starts its timing cycle. The timing cycle can be manually adjusted from 0 to 4 seconds of ON time. The controller will automatically reset 3 seconds after the infrared light beam is restored. The outdoor controllers use a low pressure, closed air system trigger. Like the indoor unit, when triggered, the timing cycle begins. However, unlike the indoor unit, once the timing cycle has finished, there is a 30 second reset cycle. This is to allow multiple axle vehicles to pass the controller without multiple ON time cycles. The AUTOMAGIC indoor and outdoor models 100 and 200 all require a power source of 115 volts and are rated at 600 watts maximum load. The AUTOMAGIC Hayride-DC and Haunted Walk models require a power source of 12 volts DC and are rated at 10 amps maximum load. Custom timing cycles and multiple channel units are available for an additional charge. OUTDOOR UNITS:Hayride 100
Hayride 200
Hayride DC
Shipping charges to be added to all ordersPrices subject to change without noticee-mail GEP Productions about this product
|
 |
GEP Productions has been creating
quality-automated props for nearly 8 years. All of our props are
put through rigorous testing to make sure they will hold up to
the usage your attraction will put them through. Most of our products
comes with regulators and lubricators which will help them last
for years to come. No other company uses lubricators. For what the
props cost, you are going to want them to be operational for many
years after you purchase them.
|
 |
| GEP Productions also creates products to use on your hayrides as well. We custom manufacture controllers that will cycle your props 'on and off' for the most realistic appearance. |
 |
| With the growing popularity of outdoor walk-through attractions, GEP has sensors and controllers which can cycle and turn 'off and on' your desired prop effects. |
 |
GEP
Productions, Inc. 2030 Barclay Messerly Rd. Southington, Ohio 44470 Phone: (330) 392-6527 Fax: (330) 392-6527 E-mail: gep@gepproductions.com |
 |
||||
|
||||
|
